Yamaha MG16X-CV Mixer

MIXING CAPABILITY

On-board processors

SPX algorithm: 24 programs, PARAMETER control:1, FOOT SW:1 (FX RTN CH on/off)

I/O

Phantom power

+48 V

INPUT CHANNELS

Mono[MIC/LINE]	8
Mono/Stereo[MIC/LINE]	2
Stereo[LINE]	2

OUTPUT CHANNELS

STEREO OUT	2
MONITOR OUT	1
PHONES	1
AUX SEND	4
GROUP OUT	4

BUS

Stereo: 1, GROUP: 4, AUX: 4 (incl. FX)

INPUT CHANNEL FUNCTION

PAD	26 dB (Mono)
HPF	80 Hz, 12 dB/oct (Mono/Stereo: MIC only)
COMP	1-knob compressor (Gain/Threshold/Ratio) Threshold: +22 dBu to -8 dBu, Ratio: 1:1 to 4:1, Output level: 0 dB to 7 dB Attack time: approx. 25 msec, Release time: approx. 300 msec
EQ HIGH	Gain: +15 dB/-15 dB, Frequency: 10 kHz shelving
EQ MID	Gain: +15 dB/-15 dB, Frequency: Mono 250 Hz – 5 kHz peaking, Stereo 2.5 kHz peaking
EQ LOW	Gain: +15 dB/-15 dB, Frequency: 100 Hz shelving
PEAK LED	LED turns on when post EQ signal reaches 3 dB below clipping
Level Meter	2x12 -segment LED meter [PEAK, +10, +6, +3, 0, -3, -6, -10, -15, -20, -25, -30 dB]

TOTAL HARMONIC DISTORTION

0.03 % @ +14dBu (20 Hz to 20kHz), GAIN knob: Min, 0.005 % @ +24dBu (1kHz), GAIN knob: Min

FREQUENCY RESPONSE

+0.5 dB/-1.5 dB (20 Hz to 48 kHz) , refer to the nominal output level @ 1 kHz, GAIN knob: Min

HUM & NOISE LEVEL

Equivalent input noise	-128 dBu (Mono Input Channel, Rs: 150Ω, GAIN knob: Max)
Residual output noise	-102 dBu (STEREO OUT, STEREO master fader: Min)

CROSSTALK

-78 dB

POWER REQUIREMENTS

AC 100 – 240 V, 50 / 60 Hz

POWER CONSUMPTION

30 W

DIMENSIONS

W	444 mm (17.5")
H	130 mm (5.1")
D	500 mm (19.7")

NET WEIGHT

6.8 kg (15.0 lbs.)

ACCESSORIES

Included Accessory: Owner’s Manual, Technical Specifications, AC power cord, Rack-mount kit, Optional Accessory: Foot Switch FC5

OTHERS

Operating Temperature: 0 to +40?C